You have no items in your shopping cart.

Subtotal: $0.00

Transmitter & Receivers

Grid  List 

Grid  List 

Transmitter and Receiver

There are many natural sources of radio waves. But in the later part of the 19th century, scientists figured out how to electronically generate radio waves using electric currents. Two components are required for radio communication: a transmitter and a receiver.

Radio transmitters
A radio transmitter consists of several elements that work together to generate radio waves that contain useful information such as audio, video, or digital data.

Power supply: Provides the necessary electrical power to operate the transmitter.

Oscillator: Creates alternating current at the frequency on which the transmitter will transmit. The oscillator usually generates a sine wave, which is referred to as a carrier wave.

Modulator: Adds useful information to the carrier wave. There are two main ways to add this information. The first, called amplitude modulation or AM, makes slight increases or decreases to the intensity of the carrier wave. The second, called frequency modulation or FM, makes slight increases or decreases the frequency of the carrier wave.

Amplifier: Amplifies the modulated carrier wave to increase its power. The more powerful the amplifier, the more powerful the broadcast.

Antenna: Converts the amplified signal to radio waves.

Radio receivers
A radio receiver is the opposite of a radio transmitter. It uses an antenna to capture radio waves, processes those waves to extract only those waves that are vibrating at the desired frequency, extracts the audio signals that were added to those waves, amplifies the audio signals, and finally plays them on a speaker.

Antenna: Captures the radio waves. Typically, the antenna is simply a length of wire. When this wire is exposed to radio waves, the waves induce a very small alternating current in the antenna.

RF amplifier: A sensitive amplifier that amplifies the very weak radio frequency (RF) signal from the antenna so that the signal can be processed by the tuner.

Tuner: A circuit that can extract signals of a particular frequency from a mix of signals of different frequencies. On its own, the antenna captures radio waves of all frequencies and sends them to the RF amplifier, which dutifully amplifies them all.

Unless you want to listen to every radio channel at the same time, you need a circuit that can pick out just the signals for the channel you want to hear. That’s the role of the tuner.

The tuner usually employs the combination of an inductor (for example, a coil) and a capacitor to form a circuit that resonates at a particular frequency. This frequency, called the resonant frequency, is determined by the values chosen for the coil and the capacitor. This type of circuit tends to block any AC signals at a frequency above or below the resonant frequency.

You can adjust the resonant frequency by varying the amount of inductance in the coil or the capacitance of the capacitor. In simple radio receiver circuits, the tuning is adjusted by varying the number of turns of wire in the coil. More sophisticated tuners use a variable capacitor (also called a tuning capacitor) to vary the frequency.

Detector: Responsible for separating the audio information from the carrier wave. For AM signals, this can be done with a diode that just rectifies the alternating current signal. What’s left after the diode has its way with the alternating current signal is a direct current signal that can be fed to an audio amplifier circuit. For FM signals, the detector circuit is a little more complicated.

Audio amplifier: This component's job is to amplify the weak signal that comes from the detector so that it can be heard. This can be done using a simple transistor amplifier circuit.

Of course, there are many variations on this basic radio receiver design. Many receivers include additional filtering and tuning circuits to better lock on to the intended frequency — or to produce better-quality audio output — and exclude other signals. Still, these basic elements are found in most receiver circuits.

Difference between a Transmitter and Receiver

The main difference between a transmitter and a receiver is that a transmitter gathers and decodes information and the receiver displays the information in an audible and/or visual form that consumers can view or listen to. The most well-known and oldest of inventions to use this system is the radio. Towers send radio waves through the air. These waves are picked up by transmitters and then converted into music by the radio receiver.

In many devices which implement radio electronics technology, the transmitter and receiver work together to emit both sound and visuals to consumers. The transmitter generally is composed of an oscillator, a modulator, and separate amplifiers for both radio and audio frequencies. This allows the device to transmit both audible and visual waves. In most areas, the use of transmitters is regulated because improper use could result in dangerous crossing of signals. For example, a crossed signal could interfere with emergency communications.

A receiver generally receives information from a transmitter through an antenna. At that time, it usually separates the signal being given by the transmitter from all other signals coming through the antenna. The sound is then amplified and decoded into a sound that users can understand.

Traditional transmitter and receiver technologies used analog signals to allow consumers to hear music on the radio and both listen to sounds and watch visuals on the television. Today, digital technology is replacing more outdated devices with better and clearer sounds and images. In order for digital signals to be received, however, consumers must own a digital transmitter and receiver or a device which has them.

There are some devices that have a transmitter and receiver all in one unit. In these cases, the combined unit is called a transceiver. These are generally used in devices such as phones where the user receives and sends audio signals at the same time.

When choosing electronics, it is important to pick items that have receivers designed for the signals one hopes to listen to or watch. For instance, a digital receiver will often not read an analog signal and vice versa. Specialize converter boxes can be purchased to convert a receiver into the correct kind for the signal being used. This is especially important now that many television stations are required by law to feature all digital programming, because many consumers own televisions with outdated analog receivers.