CPE220 5.8G Wireless Bridge PTMP WiFi PTP Point To Point Access Outdoor Network CPE 2KM Transmission Distance With 12DBi High-Gain Antenna 2 LAN 100MBps Ethernet Port 24V PoE Power Supply 2-Pack
CPE220 wireless bridge is a 5.8G Long Range WiFi Extender Outdoor CPE with a digital display. It complies with the 802.11a and 802.11n,standards to ensure interoperability. Point-to-point pairing also can be done by dialing without having to access the GUI, avoid the complex setup program, save much human work and cost, make the long-range wireless coverage, data transmit, and wireless monitoring simple and professional.
PTMP Pre-programmed: Out of the box, connect the 2 wireless bridges and PoE adapters through the ethernet cable for power supply, and wait for 1 minute for the "Link" green indicator to light up to indicate that they have been automatically paired succeeded(Point to Point). Suitable to extend the internet to your garage, barn, warehouse, store via wireless transmission, instead of laying out the ethernet cable.
Using 5.8G / 300Mbps wireless transmission rate between wireless bridges can support 2KM transmission distance(Barrier-free), and can provide up to 100Mbps wired network speed, suitable for connecting the networks in 2 or more buildings, internet access sharing, remote video camera surveillance, or remote network WiFi access.
Extend the network to another building within 2KM through a point-to-point method. The master CPE receiver is connected to your internet through a PoE adapter, and the slave CPE transmitter is connected to the router(AP mode) or directly to the computer through a PoE adapter to expand your network/WiFi to another building, such as expand your home network to store.
Realize remote camera video surveillance or elevator monitoring through wireless bridge point-to-point or point-to-multipoint. The master CPE receiver is connected to a DVR, or monitor, or computer through a PoE adapter, and the slave CPE transmitter is connected to an IP Camera through a PoE adapter to expand your camera surveillance range. Reference pictures are easy to connect CPE with IP cameras & networks DVR.
About Power Adapter: PoE power supply is recommended, so the PoE adapter is included in the package(Ethernet is used as the power cord - Not included), the DC adapter and power cord are not included in the package.
About installati: The mounting bracket is not included in the package. This mounting bracket (ASIN: B003D1QPHK) or DIY bracket is recommended.
About use the CPE: Our wireless bridge supports pre-programming (Out of the box) and a dial-up connection. It is recommended for novices to use the pre-programming connection. If you are a professional, you can access the CPE through your computer to set it up.
About support: We provide a 1-year warranty and permanent technical support. If you have any questions about the wireless bridge, you can contact us at any time through Amazon, and we will solve the problem for you ASAP!
About the manual: We will keep updating the manual, so you can contact us through Amazon to get the latest manual, the paper manual in the package is for reference only.
Computer Access To CPE:
1. Use an Ethernet cable to connect the PoE adapter (PoE port) to the CPE for power supply, and use another Ethernet cable to connect the PoE (LAN port) to the computer's LAN port.
2. To ensure that you can successfully access the CPE, you need to modify the computer’s IPv4 address to 192.168.255.X(X represents the number from 2-255), refer to the user manual or Google to search for how to modify the computer’s IP address.
3. Determine the IP address of the CPE through the numbers on the digital display. For example, if the number displays "2", the IP address of the master A-CPE is 126.96.36.199, and the slave B-CEP is 192.168.255.202. Refer to the user manual number and IP comparison table.
4. Make sure that the IP address of the computer is successfully changed to 192.168.255.X, and the IP address of the CPE is found. Then you can open the web browser of the computer and enter the IP address of the CPE to access the CPE, enter the account password "admin/admin" to log in, and the access is successful.
Wired interface: 10/100Mbps LAN*2
Power supply: POE 24V 0.5A
Antenna: 12DBi (5180～5825MHz)
Working temperature: -4℉～158℉
Storage temperature: -22℉～176℉
Item Weight: 23 oz
2 X CPE220 Wireless Bridge
2 X PoE Power Adapter
2 X Metal Hoop
1 X User Mamual
（If you need the latest version of the PDF manual, please contact us）
Please download the user manual on https://www.eoqo.com/eoqo/usermanual/CPE220-user%20manual.pdf